6.5 PRC Brass – ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geometry, our brass will generally have a different case volume than most other manufacturer’s brass and therefore will require a different charge weight to achieve the same pressures and velocities. We recommend using a reputable load data source and working up from their recommended minimum starting loads.
We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type). Failure to reduce charge weights established using other manufacturers brass may result in higher pressures and velocities while using ADG brass and may result in unsafe pressure levels.
All ADG brass sold is in their standard finish showing annealing marks.
***Boxes are 50 pieces of brass
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to - www.P65Warnings.ca.gov.
ADG Premium brass was designed not only for consistency, but for durability. One of the ways we accomplished this was adding material to the case in specific areas to strengthen it. With the additional material, our brass is heavier than most other manufacturers brass and therefore will require lower charge weights to achieve the same pressures and velocities due to the reduced volume inside the brass. We recommend using a reputable load data source and working up from their recommended minimum starting loads. Failure to reduce charge weights established using other manufacturers brass will likely result in higher pressures and velocities while using ADG Premium brass and may result in unsafe pressure levels. We recommend reducing any existing charge weights by 10% and re-developing your specific load when replacing any component in a load recipe with a new component (brass, projectile, primer, or powder type).
Manufacturer | ADG |
Model | 6.5 PRC |
UPC | 850001379243 |
Width | 4.0000 |
Length | 7.0000 |
Height | 3.5000 |
Weight | 2.2500 |
Meta Description | 6.5 PRC Brass – ADG manufactured brass is optimized not only for consistency in performance, but also for durability. One of the ways we accomplished this is by optimizing the material in specific areas to strengthen it. With the optimized material geom |
Page Title | ADG Atlas Development Group 6.5 PRC Brass | Drifters Gear | Palm Beach FL |
1 review have been written for this product.
I'm completely impressed with the 5x10 jewelry organizer container with top foam to protect the cases during shipping. No other high end brass supplier protects their products in favor of the client. And in terms of the brass finish and quality, ADG ranks among the best in the market.
And again, the drifters shipping team melts the competition by far, the merchandize was well packaged and it was received in a short time (less than a week).
%question_count% question%question_count_plural% have been answered for this product.
%distance%
%inventory_count%
%address_1%
%city%, %state% %postal_code%
%phone_number%
%directions_link%
Show All Stores
with available in-store pickup